Kolink Citadel SE ARGB Black

Following the successful launch of the Citadel Mesh RGB comes the Kolink Citadel Glass SE. The front panel has been swapped for tempered glass for a premium look, and also includes a pair of ARGB strips that highlight both sides of the front panel. Additionally, the Citadel Glass SE adds a front USB3.2 Gen 2 Type-C port on the I/O panel. With a hinged tempered glass side panel and 3x 120mm PWM aRGB fans, your components and lighting will be fully exposed, allowing for truly impressive results.

Glass front panel with 2x pre-installed ARGB LED PWM fans.
A pair of ARGB strips that highlight the front panel.
Pre-installed 120mm PWM rear fan with digitally addressable RGB lighting.
RGB controller hub with remote control that allows for various lighting modes and effects.
Sync option with motherboard software included as standard.
Hinged tempered glass side panel for a clear view of the interior.
Designed for Micro-ATX/Mini-ITX motherboards.
Dual-slot vertical GPU support (supports up to 2.5 slots) - riser cable sold separately.
Support for radiators up to 280mm in the front and 240mm in the top.
I/O panel with 1 USB3.2 Gen 2 Type-C port, 2 USB3.0 ports, HD audio.
Supports graphics cards up to 345mm, CPU coolers up to 190mm, and PSUs up to 200mm.
Kolink Citadel Glass SE: Aesthetic upgrade, eye-catching lighting

The Kolink Citadel Glass SE comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller and remote, or by connecting to the 3-Pin 5VDG connector on your motherboard using the corresponding software. These fans offer good performance, attractive lighting effects, and can even be automatically speed controlled by connecting them to the motherboard's PWM headers. The full glass front panel, along with the two ARGB LED strips, which can also be controlled via the remote or connection to the motherboard, contribute to the excellent aesthetics of the case. Users also have the freedom to install a 280mm radiator in the front and a 240mm radiator on the top.

In addition to the pre-installed fans, users can also install two more 120/140mm fans on the top, where a magnetic dust filter is installed in the honeycomb-style grill. A full tempered glass side panel shows off your system build and is easily opened and closed using the pull tab. Magnets are used to hold the side panel in place when closed.

The interior is completely black, with a shield for the power supply that only adds to the sleek, understated look. Behind the shield is where users will find space for a pair of 3.5" hard drives in the provided HDD cage. Alternatively, 2.5" solid-state drives (SSDs) can be installed here or next to the motherboard. The motherboard tray and PSU shield offer numerous openings for optimal cable management, with cable management space of up to 24mm. Beneath the case is a removable dust filter suitable for an ATX power supply of up to 200mm.

Graphics cards can be up to 34.5cm long (32cm if a liquid cooling system is mounted in the front) and CPU coolers can be up to 19cm high. Additionally, the I/O panel located on the front features a USB3.2 Type-C port as well as two USB3.0 Type-A ports.

Specifications

- Dimensions: 230 x 395 x 403 mm (W x H x D)
- Case dimensions: 285 x 465 x 430 mm (W x H x D)
- Material: Steel, tempered glass, mesh, plastic
- Weight: Approximately 5.3 kg
- Color: Black
- Form factor: Micro-ATX, Mini-ITX
- Filters: Top, bottom
- Drive bays: Internal: 2x 3.5"/2.5" and 2x 2.5"
- Power supply: 1x standard ATX (optional)
- Expansion slots: 4+2
- Maximum graphics card length: 345 mm
- Maximum CPU cooler height: 190 mm
- Maximum power supply length: 200 mm
Total possible fans:
- Front: 2x 120/140mm or 1x 180/200mm
- Roof: 2x 120/140mm
- Rear: 1x 120/140mm
Pre-installed fans:
- Front: 2x 120mm ARGB PWM
- Rear: 1x 120mm ARGB PWM
Radiator support:
- Front: 1x 280/240mm
- Roof: 1x 240mm
I/O panel:
- 1x USB3.2 Gen 2 Type-C (internal connection)
- 2x USB3.0 (internal connection)
- 1x Audio in/out
- RGB/Reset switch